The 10 Step Steam Carpet Cleaning System
Our Carpet Cleaning System, the El Diablo by MasterBlend has been awarded the Gold Seal of Approval by the Carpet & Rug Institute, the highest rating for cleaning system based on standardized testing.
This is what you should expect...
Step 1 – Complete & Thorough Inspection
Our technician will inspect your carpet and cover your concerns about spots and stains.
Step 2 – Furniture Moving
We move most small pieces, but will cover exactly what you want moved during the Inspection. Please remove loose items and breakables from any furniture that will be moved during cleaning. Our cleaning tool can get under most furniture with leggs. If you would like us to clean under your bed, just remove the mattress and box springs. With the mattress/box springs removed, we can clean under your bed with out any additional costs. We recommend you place these in you bathroom or any place we will not be cleaning
Step 3 – Dry Soil Removal
Dry soil removal is the most important step in ANY cleaning process. A high-velocity, commercial grade vacuum is used to remove dust and dry soil from your carpet. Most carpet cleaners completely skip this step or say they do it while they are 'extracting' your carpet, after getting your carpet wet. This process needs to be done dry for maximum effectiveness.
Step 4 – 1st Spot Cleaning
For special spots, specific cleaning agents are applied prior to cleaning.
Step 5 – Application of Cleaning Treatment
A cleaning agent is applied thoroughly to your carpet to loosen soils prior to cleaning.
Step 6 – Agitation
For heavly soiled carped, we will use a Counter Rotating Brush machine to guarantee the cleaning agent is worked deeply into your carpet pile.
Step 7 – Deep Cleaning
Deep Cleaning is accomplished by using a High-Flow/High-Heat/High-Recovery Diesel heated Truckmount cleaning machine.
What does this mean?
Well, with High-Flow, we use more water, allowing a thorough flusing of your carpet that removes more soil. High-Heat adds the power to quickly remove oily soils with less cleaning agents. The High-Recovery system increases removal of the water, cleaning agents and soils in your carpet: this is accomplised with special attachments to our cleaning wands, vacuum system and hoses.
Why does this matter?
With our advanced cleaning system, we remove more soil, we do it faster, and your carpet dries quickly--normally in 45-120 minutes.
Step 8 – Post Cleaning Spotting
Spots not removed at this point are individually treated with professional cleaning agents and then re-cleaned. Spot treatments for Food Dyes and Pet Stains are applied and continue to work during the next several hours. These areas will be dry when the cleaning agents have finished working.
Step 9 – Deodorization and/or Fabric Protector (optional)
These Optional treatments are now applied We recommend our Deodorization treatment for severe overall odor challenges. For pet odors that are confined to very specific areas, we recommend our deep pad pet odor process.
We do recommend Fabric Protector on every carpet after cleaning. Fabric protector, whether applied at the carpet mill or in the home, will wear off and needs to be re-applied. Spots and spills are easier to clean with treated carpet. Also, normal soil is easier to vacuum. The removal of this soil will keep your carpet looking great for many years. Although fabric protector has been around since the 1950's. But, it was not until recently that a fabric protector was available for all carpet made from olefin and polypropylene. These fibers are more common today and older types of fabric protector would not help these fibers resist oily soils. We have the solution to that problem!
Step 10 – Final Inspection
You will go over the cleaning results with your technician when cleaning is finished.
Have Questions, Need a Quote or want to Schedule Service?
|